The Ford Barn - View Single Post

BRENT in 10-uh-C · 08-29-2010, 05:13 PM

I echo the sentiments of of 40 Deluxe & Pete!!

Practicing on your good Model A parts is not smart IMO. I will say that we use 1/16th tungsten and we have a small roll of the smallest Stainless MIG wire that we use to TIG with. I use a Lincoln Preceision TIG 225 so my setting would not apply to your machine even if I were using your machine and my machine at the same time.

08-29-2010, 05:13 PM	#4
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,520	Re: Tig welding a Model A I echo the sentiments of of 40 Deluxe & Pete!! Practicing on your good Model A parts is not smart IMO. I will say that we use 1/16th tungsten and we have a small roll of the smallest Stainless MIG wire that we use to TIG with. I use a Lincoln Preceision TIG 225 so my setting would not apply to your machine even if I were using your machine and my machine at the same time. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .