View Single Post
Old 08-23-2020, 09:50 PM   #12
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 2,460
Default Re: Aug/Sept project 2 to make 1 39 std cpe on sdn pan

tub1 is right except the rust damage in the cpe header is extreme. However I need to check the angle of the cpe header skin vs the sdn skin angle. On another similar swap there was a problem with the higher sdn roof. Taking a brief break. thanks Newc
Newc is offline   Reply With Quote