View Single Post
Old 08-21-2020, 10:29 PM   #4
swoopNZ
MEMBER EMERITUS
 
Join Date: May 2010
Location: New Zealand
Posts: 1,380
Default Re: Aug/Sept project 2 to make 1 39 std cpe on sdn pan

I would not separate both cars at their pillars.
Cut out the sedan floor and install it in the coupe.
It will then retain much more of it's originality.
Sedan and coupe rear floor sections are way different.
Somebody may then buy the sedan and install another floor.
Another option is to buy new Drake/Carpenter or United Panel front and rear floor sections and install them in the coupe.
Not a big job.

Last edited by swoopNZ; 08-22-2020 at 06:15 PM.
swoopNZ is offline   Reply With Quote