Quote:
Originally Posted by Rand
I have one 6 volt solenoid fused wire to hot side of the starter solenoid, the other terminal of the solenoid to a ground. Messing with it today I broke the OD cable where it mounts to the lever. so maybe the lever wasn't fully moving as it should? Also I grounded the toggle switch today.
I'm on the hunt for another pull/push OD cable. (anybody have one?)
When I find one I'll report back. Also..When I get it going I will also wire it all up as Henry intended Thank you everybody!
|
C&G Ford Parts has a O/D Cable that you can cut to fit.
https://cgfordparts.com/ufolder/ford...r=A9AZ-7A650-A
When I put the 49 Merc O/D transmission in the tonner I used this cable.