Re: 1st gear is slightly jammed
Guten Tag!
The single disc clutch separates completely.
The compression spring and the pressure pieces for snapping onto the selector shaft are new.
Yes, the reverse gear is also a little bit too tight.
And the 2nd gear sometimes jumps out on long strong climbs.
Could it be that the welded-on ball is a little too tight? I fitted them with a tolerance of 0.05 mm.
__________________
Beste Gruesse aus Deutschland,
Werner
Ford Model A, Roadster, 1928
Citroen 11 CV, 1947
Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version
|