[AnthonyG]

I run Tri power on an 8BA. Had pvc valve pulling crankcase fumes from crankcase vent tube to vacuum fitting on intake manifold. I removed for unrelated issue then rethought putting on the same way thinking the crankcase fumes s/b filtered before re-entering directly into the engine / vacuum port. Normally on stock 2 or 4 barrel an air cleaner would receive the fumes on filter side of carb. Typical Tri power air cleaners have no port for pcv valve tube. How do others set up pvc w Tri power? Does anyone make pcv valve filter to use on vacuum side of pvc valve tube?