The Ford Barn - View Single Post

Mr. Ed · 10-09-2018, 10:06 AM

I have a good housing that I bought after ours was found to be so rusted that it's only value is as a paper weight. So I am looking to buy:

Upper plate
Lower plate
Points
Condenser
Hardware pack
Rotor
Cap
Distributor body
Coil
"Wires"

I checked prices between several vendors and I have a list compiled of who has what and their costs. And from working on old cars for years and buying from some of these vendors, I see Mac's is still higher than the others. Nice to see there are some constants in the world today.

Am I missing anything?

Later!
Mr. Ed

10-09-2018, 10:06 AM	#1
Mr. Ed Junior Member Join Date: Oct 2018 Location: South Jersey Posts: 13	Rebuilding a distributor I have a good housing that I bought after ours was found to be so rusted that it's only value is as a paper weight. So I am looking to buy: Upper plate Lower plate Points Condenser Hardware pack Rotor Cap Distributor body Coil "Wires" I checked prices between several vendors and I have a list compiled of who has what and their costs. And from working on old cars for years and buying from some of these vendors, I see Mac's is still higher than the others. Nice to see there are some constants in the world today. Am I missing anything? Later! Mr. Ed __________________ 1951 F-1, 351W, C-4, Henry. 1993 Mustang 5.0 LX convertible, Sally. 2006 Jeep Grand Cherokee Laredo, Herman.