The Ford Barn - View Single Post

gw · 12-24-2019, 01:07 PM

The pilot bearing does not fit snugly on the trans input shaft. Measuring shows that the shaft is .002 smaller than the pilot bearing. Is this a problem? If so, could a brass shim ring be used?

12-24-2019, 01:07 PM	#1
gw Junior Member Join Date: Oct 2018 Posts: 10	Pilot Bearing Question The pilot bearing does not fit snugly on the trans input shaft. Measuring shows that the shaft is .002 smaller than the pilot bearing. Is this a problem? If so, could a brass shim ring be used?