Re: What I Did on My Lunch Hour
Sound like you have one of the original carbon seal failing on you and leaking out from the pourous bushing which are known to leak after a while. Skips rebuild water pumps are the best and using a seal bearing and you do not have to put oil in the upright oillers they will be there for look only. Vic when I did my spark plug wire loom I build a template with a piece of 3/4 plywood and bolted it down so that it would be more stable to feed all of the wires through then I removed the wire loom tube from the fixture and installed it back on the motor very easy to do.
Frenchy
|