The Ford Barn - View Single Post

callbald · 10-12-2021, 08:47 PM

I am converting from manual to Borgeson P/S. Do I need to replace the water pump pulley from 1 to 2 belt grooves. to match the new crank 2 groove pulley.
Original 1st crank groove drives the generator and water pump.

The second crank pulley would idle off the water pump and drive the P/S pump.
Or can I go directly from the crank pulley to the P/S pulley and leave the water pump pulley as is.

10-12-2021, 08:47 PM	#1
callbald Senior Member Join Date: Jan 2014 Location: Leo, Indiana Posts: 235	64 Galaxie 289 water pump pulley I am converting from manual to Borgeson P/S. Do I need to replace the water pump pulley from 1 to 2 belt grooves. to match the new crank 2 groove pulley. Original 1st crank groove drives the generator and water pump. The second crank pulley would idle off the water pump and drive the P/S pump. Or can I go directly from the crank pulley to the P/S pulley and leave the water pump pulley as is.