04-03-2020, 02:44 PM
|
#24
|
Member
Join Date: Oct 2018
Location: Austin, Texas
Posts: 39
|
Re: 1935 Convertible Sedan top restoration story
I'm continuing to work on the convertible top. With the help of others I found where some of the rubber pads go on the frame iron. The top and bottom of the center posts is pretty obvious but the smaller 1 inch square pads were a little harder. I am including some photos so there is a record here on the forum in case someone out there wants to know. I found those square pads were held in place with 6-32 bolt (3/8 inch) and threaded right into the frame iron.
|
|
|