The Ford Barn - View Single Post

Kevin in NJ · 11-11-2016, 10:42 AM

I had a 13/32 deep socket in some cheap 1/4" sockets I had laying around.

The machining operation that made the hex left these leaves inside the socket that would not allow it to go over the tube portion. They were hard so I used some of these small dremel diamond bits I got at one of the cheapo tool tables at Hershey one year to grind them down. Worked like a charm.

Keep your eyes open at garage sales and such as you never know what you find.

11-11-2016, 10:42 AM	#367
Kevin in NJ Senior Member Join Date: May 2010 Location: South East NJ Posts: 3,398	Re: carburetor 13/32 deep well socket I had a 13/32 deep socket in some cheap 1/4" sockets I had laying around. The machining operation that made the hex left these leaves inside the socket that would not allow it to go over the tube portion. They were hard so I used some of these small dremel diamond bits I got at one of the cheapo tool tables at Hershey one year to grind them down. Worked like a charm. Keep your eyes open at garage sales and such as you never know what you find.