The Ford Barn - View Single Post

JM 35 Sedan · 01-29-2018, 10:51 PM

If you had the engine and transmission out of the truck, you could probably turn the transmission around enough to remove all the pressure plate bolts, even with the engine seized, and separate the trans from the engine.

01-29-2018, 10:51 PM	#20
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Pulling flathead away from Trans If you had the engine and transmission out of the truck, you could probably turn the transmission around enough to remove all the pressure plate bolts, even with the engine seized, and separate the trans from the engine. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*