Quote:
Originally Posted by Hot Rod Reverend
Thanks Dave, I had not thought about simple Stainless Steel for those normal nuts and bolts. There are some areas I could use them where things are hidden.
I will check into the black oxide thing. I have heard pro's and cons on that one. I really don't want to have to purchase a whole new kit, but I really have not check into what that will cost.
|
McMaster-Carr
http://www.mcmaster.com/#standard-cap-screws/=tir593 has a large selection of bolts in all shapes and sizes along with just about anything else you could need.
I would use caution on using S/S hardware unless you assemble with an anti-sieze. S/S fasteners easily galls, the bolt and nut become one...