The Ford Barn - View Single Post

34p-kup · 01-18-2019, 01:05 AM

GearheadBill, it appears the shortest uprights have been cut off. There should be a rectangle hole with a tab in floor. That tab has a hole in it to screw to the bottom of wood. rbullockv8 shows the correct pointed brackets although his is RPU. It seems rather barbaric to stick those pointed brackets through the upholstery. At the top of seat back were a formed metal loop that screwed to wood (next to window) after skewering on pointed brackets. I think I see stripped out holes in your wood.

01-18-2019, 01:05 AM	#8
34p-kup Member Join Date: Aug 2012 Location: Aurora, CO Posts: 34	Re: 1934 picku cab wood and seat GearheadBill, it appears the shortest uprights have been cut off. There should be a rectangle hole with a tab in floor. That tab has a hole in it to screw to the bottom of wood. rbullockv8 shows the correct pointed brackets although his is RPU. It seems rather barbaric to stick those pointed brackets through the upholstery. At the top of seat back were a formed metal loop that screwed to wood (next to window) after skewering on pointed brackets. I think I see stripped out holes in your wood.