[gearheadbill]

I thought that resurrecting this thread might be better than me starting a new one. Lots of good info already posted here.

I posted this on another older thread but not getting any traction, so I'm starting a new thread.

My 34 has some original, some reproduction and a lot of poorly homemade cobble-up and I have no idea what the original should be like. I have a good friend who has a mostly original 32 pickup but the info I gleaned so far leads me to believe that the 2 model years were very different from the factory.

My seat cushions are both new...new springs, new wood, new fabric. I am assuming that they are correct for 1934. Bottom cushion has a tag (pic). But there are NO brackets or whatever to hold the back in place. Unclebucks has 'S' shaped sheetmetal brackets which are screwed to the seat back at the top and to the cab wood. The frame of my backrest cushion has no wood to attach such a bracket.

Also, is there another bracket(s) to hold the lower part of the backrest in place?