The Ford Barn - View Single Post

TJ · 12-28-2019, 10:20 AM

Double check to make sure all the fasteners have been removed. Put a lot of padding on the cowl to prevent any damage to the paint. Then gently pry down from one side to the other to get it loose. I would also recommend you have a friend help you as the frame with glass in it can be heavy. Dave is correct that the hinge is probably stuck to the rubber seal.

12-28-2019, 10:20 AM	#3
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,037	Re: 32 Ford Pickup windshield frame removal Double check to make sure all the fasteners have been removed. Put a lot of padding on the cowl to prevent any damage to the paint. Then gently pry down from one side to the other to get it loose. I would also recommend you have a friend help you as the frame with glass in it can be heavy. Dave is correct that the hinge is probably stuck to the rubber seal.