View Single Post
Old 12-07-2014, 03:09 PM   #161
Senior Member
FrankWest's Avatar
Join Date: Sep 2013
Posts: 2,724
Default Re: 1933 can't start after recent restart

Originally Posted by DavidG View Post

You probably cannot remove the timing gear cover without at least loosening the two special bolts that attachment the front motor mount bracket to the front cross member. It is probably best to remove that bracket altogether as it will only get in the way of your replacing the timing gear (should it prove to have some sheared teeth).

Those ledges that you refer to are characteristic of all '32 and '33-'34 four-cylinder timing gear covers (those two types are different and are not interchangeable).
But the engine bracket now loose is still trapped between the ledges and the Lower engine pulley
FrankWest is offline   Reply With Quote