Re: head gasket
I have used a variety of gaskets with and without spray. The best results so far has been with the Best brand graphite gasket with spray. See https://www.snydersantiqueauto.com/p...d=979899&cat=0. It is important to have very clean surfaces that are flat and to follow the torque sequence and re-torque several times and then once a year. I filled any pits with JB weld and used 400 grit paper wrapped around a flat file to smooth after it was cured.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|