The Ford Barn - View Single Post

Frank Miller · 10-07-2019, 06:34 AM

Even if it could come out from the bottom it won't be going in easy from the bottom.
I once reconditioned a rod for an MG or Triumph, I forget by getting the piston low enough to remove the wrist pin. Needed a special pair of snap ring pliers. There was not ebough room to get the piston past the webbing.

10-07-2019, 06:34 AM	#8
Frank Miller Senior Member Join Date: May 2010 Location: Auburn, MA Posts: 2,106	Re: #4 Piston Removal Even if it could come out from the bottom it won't be going in easy from the bottom. I once reconditioned a rod for an MG or Triumph, I forget by getting the piston low enough to remove the wrist pin. Needed a special pair of snap ring pliers. There was not ebough room to get the piston past the webbing. __________________ “The technique of infamy is to start two lies at once and get people arguing heatedly over which is true.” ~ Ezra Pound