View Single Post
Old 05-08-2019, 03:39 PM   #5
glennpm
Senior Member
 
glennpm's Avatar
 
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 693
Default Re: Adjusting Fuel Level in King Seeley Gauge

Hi Ted,


I replied from my phone, wanted to add an comment, but message didn't make it to the group it seems.


if I do add rod, I'll either get un-coated brazing rod or if I can't get a piece, a rod of copper. The capillary tube from the reservoir to the bottom of the glass I expect is soft copper so it must be okay for the corrosive red fluid.


I understand on the reserve of two gallons but with my current gauge and half a tank of gas, i would only have a reading of 1/8.


Glenn
glennpm is offline   Reply With Quote