The Ford Barn - View Single Post - Adjusting Fuel Level in King Seeley Gauge

deuce_roadster · 05-08-2019, 10:06 AM

I would drive around a bit before trying to calibrate the gauge. In my experience rocking the car will tell you if it is working but the fluid comes up higher when you actually drive the car around. At least the last one I did acted this way, my 33 phaeton. Also make sure your cap is making a good seal, the vent for the tank is built into the tank unit.

05-08-2019, 10:06 AM	#2
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 3,799	Re: Adjusting Fuel Level in King Seeley Gauge I would drive around a bit before trying to calibrate the gauge. In my experience rocking the car will tell you if it is working but the fluid comes up higher when you actually drive the car around. At least the last one I did acted this way, my 33 phaeton. Also make sure your cap is making a good seal, the vent for the tank is built into the tank unit.