The Ford Barn - View Single Post

Terry,OH · 11-08-2019, 07:04 AM

Appears to be 33-34 oil pan and intake appears to be 34. It may be good not to ship with the aluminum intake manifold, if you have an old cast iron intake laying around. Does the engine have a breather at the oil pan front RH side? if not then 33-34. If the oil pan is 33-34 and without the breather be careful with it, and the dip stick boss $$! If the heads are aluminum also be careful with them. for the same reasons.

11-08-2019, 07:04 AM	#2
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: Flathead Partially Disassembled Appears to be 33-34 oil pan and intake appears to be 34. It may be good not to ship with the aluminum intake manifold, if you have an old cast iron intake laying around. Does the engine have a breather at the oil pan front RH side? if not then 33-34. If the oil pan is 33-34 and without the breather be careful with it, and the dip stick boss $$! If the heads are aluminum also be careful with them. for the same reasons.