Re: '29 CC PU assembly confusion
So I took a couple pictures.
The two bolts seen from below in post #8, are at the back wall of the cab behind the seat. (You will notice that this is a different ccpu from the one in post 8.)
The two carriage bolts are at the bracket for the A-pillar.
Measured from the face of the rear crossmember bracket (pictured) forward the cab bolt that goes through the frame is 23 3/8".
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62
Last edited by 1955cj5; 11-14-2020 at 07:53 PM.
|