View Single Post
Old 11-10-2020, 03:57 PM   #8
Gary Tosel
Senior Member
 
Gary Tosel's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,138
Default Re: 1936 starter switch mounting

The coil wire attaches to the ignition switch on the steering column. From that switch it goes to one side of the ballast resistor located on the firewall. From the ballast resistor it goes along with other wires through the firewall and goes down the left side of the engine to the coil. The other wires include those for the generator and are all located inside the spark plug wires tube. I hope this helps.
Gary Tosel is offline   Reply With Quote