The Ford Barn - View Single Post

koates · 11-09-2020, 06:42 PM

The starter switch is mounted on the top of the frame rail near the steering box with two 1/4 x 28 bolts and nuts. The button comes up through a hole in the floor board between the clutch and brake pedals. Regards, Kevin.

11-09-2020, 06:42 PM	#2
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 2,079	Re: 1936 starter switch mounting The starter switch is mounted on the top of the frame rail near the steering box with two 1/4 x 28 bolts and nuts. The button comes up through a hole in the floor board between the clutch and brake pedals. Regards, Kevin.