View Single Post
Old 10-23-2020, 07:12 PM   #11
BoxCar Tom
Senior Member
 
BoxCar Tom's Avatar
 
Join Date: May 2010
Location: Basking Ridge, NJ
Posts: 587
Default Re: 32 Ford brake cross shaft assembly

Quote:
Originally Posted by Floyd View Post
I found polyurthane bushing that work great from Grainger. Top quality, made in Germany and cost about $7.00. I don't have pics to show. They may have been flanged bushings which I just cut off the flange. Don't recall. I do know that they fit perfectly and work great. You do want to rebuild this assembly as I can assure you that the bushings are shot and you will never get good solid braking until you do this. If you have NOS ,then you are fine. Getting the assembly apart is a bit of a struggle. Others may have better ideas, but my brakes are terrific, zero slop in the system and Flathead Ted floaters. Good luck.

Floyd, My brother is working on his 32 brake cross shaft and rebuilding one for me. So I have been been posting questions for him. He went to both Granger and McMaster. Neither company had polyurthane bushing that fit the specs. Do you have any additional info that might help? Thanks
BoxCar Tom is offline   Reply With Quote