The Ford Barn - View Single Post

Jacksonlll · 11-20-2019, 06:35 PM

Two things to check. Both easy. Unscrew fuel line in carb and make sure the ferrule is at the very end of the tube. If not, circumcise it a bit. Turn the gas valve on and make sure you get full flow of about a cup of gas. If not, blow back to clear the line and try again. Good luck.
All those changes were not needed. Save all the parts you removed.

11-20-2019, 06:35 PM	#3
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: Rsk Two things to check. Both easy. Unscrew fuel line in carb and make sure the ferrule is at the very end of the tube. If not, circumcise it a bit. Turn the gas valve on and make sure you get full flow of about a cup of gas. If not, blow back to clear the line and try again. Good luck. All those changes were not needed. Save all the parts you removed.