The Ford Barn - View Single Post - Trying to save a "raised deck" v-8 !!!!!!! UPDATED!!

Tinker · 10-03-2019, 11:12 PM

Yep, you might of caught it at the right time at the scrap yard. Looks like it wasn't outside that long.

All in what you need. Maybe rebuild, maybe run it. Many get into the good intention trap of redoing something only to let it sit forever.

If you are going to machine it. Maybe leave another bore for the next guy.

Looks like you might have a nice one!

.

10-03-2019, 11:12 PM	#18
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: Trying to save a "raised deck" v-8 !!!!!!! UPDATED!! Yep, you might of caught it at the right time at the scrap yard. Looks like it wasn't outside that long. All in what you need. Maybe rebuild, maybe run it. Many get into the good intention trap of redoing something only to let it sit forever. If you are going to machine it. Maybe leave another bore for the next guy. Looks like you might have a nice one! . Last edited by Tinker; 10-03-2019 at 11:28 PM.