The Ford Barn - View Single Post

Deluxe Delivery · 07-23-2012, 01:52 PM

I bent the ends back just a tad with needle noses. Put the bottom rubber in first, then the copper and then slid the top rubber in. Then I pressured the copper into the right position with a screw driver, bumping it against the end of the copper until it slid into place. Closing the door gently seated it correctly.(The second one went much easier.)

07-23-2012, 01:52 PM	#7
Deluxe Delivery Senior Member Join Date: Nov 2010 Location: Pennsylvania Posts: 370	Re: I will give anyone $100... I bent the ends back just a tad with needle noses. Put the bottom rubber in first, then the copper and then slid the top rubber in. Then I pressured the copper into the right position with a screw driver, bumping it against the end of the copper until it slid into place. Closing the door gently seated it correctly.(The second one went much easier.)