[shew01]

By the way, in case someone else finds this thread useful later, to remove the tower, I:

- Put the shifter in second gear, per PM and previous post (it would have been wise to wrap the end of the shifter with tape to avoid potential scratches)

- Removed the 6 bolts on the bottom of the tower plate

- Wiggled the tower assembly loose and to the passenger side of the car to get it free from the transmission case—be careful—this is awkward, and it would be easy to scratch up the car with the end of the shifter—fortunately, I didn’t scratch anything

I’m guessing that if I move the shifter in the assembly or manage to move the gears, the tower will be more difficult to reinstall.

Sent from my iPhone using Tapatalk