View Single Post
Old 04-02-2020, 07:58 PM   #19
lsr490
Member
 
Join Date: May 2012
Location: RTP North Carolina
Posts: 68
Default Re: Solo Motor Installation

Quote:
Originally Posted by Y-Blockhead View Post
Not sure if it is optimal but the length of the bar is ~16" now, shorter than the head. When it was full length it hit the firewall. I used #1 and #4 spark plug holes for lift points. It could be even a little shorter.
I was just getting ready to cut four inches out of mine. I had to put a bunch of towels on my firewall getting the engine out. If you had to do it again would you go 14" or 15"?
Thanks
__________________
"Avoid Model A Mythsteries. Read, study and challenge ALL advice with current logic, chemistry and technology!" author unknown
lsr490 is offline   Reply With Quote