The Ford Barn - View Single Post

barrelnose · 11-16-2019, 07:50 PM

Thanks for the replies, I got the distributor out last night and it isn’t the same as the A.
It wasn’t a blind hole,but the distributor doesn’t have the groove machined in it for the lock bolt either. It has a clamp arrangement with a pinch bolt at the base of the distributor housing which must be used for locking it in position.

11-16-2019, 07:50 PM	#4
barrelnose Member Join Date: Jul 2010 Location: Perth Hills Western Australia Posts: 58	Re: B model distributor question Thanks for the replies, I got the distributor out last night and it isn’t the same as the A. It wasn’t a blind hole,but the distributor doesn’t have the groove machined in it for the lock bolt either. It has a clamp arrangement with a pinch bolt at the base of the distributor housing which must be used for locking it in position.