View Single Post
Old 04-24-2019, 08:40 AM   #4
RalphM
Senior Member
 
RalphM's Avatar
 
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 1,936
Default Re: front spring shakle

I bought the driver tool, put the pins outside at -25, heated the springs with a heat gun, and still ended up damaging them. Took me 2-1/2 sets to get them in the front spring & perches.
When I did the rear, I went to the urethane style, so easy . I drilled the pins and used castellated nuts and cotter pins so it doesn’t look too out of place.
RalphM is offline   Reply With Quote