Quote:
Originally Posted by scicala
Yes, it's as follows:
Center Carb - C1AE-9510-AA LIST 2436
Front Carb - C2SE-9510-A LIST 2497
Rear Carb - C2SE-9510 -B LIST 2498
Thank you, Sal
|
You don't need to thank me Sal as I learn from all of this -
The MPC (1960-64 FINAL ISSUE) calls for -
CENTER - C2SE-9510-A - LIST 2497
FRONT - C2SE-9510-E - LIST 2499
REAR- C2SE-9510-B - LIST 2498
The MPC is a period time shot on application, meaning the carbs are listed as of the catalog printing. It will not give you all correct info. You would need earlier issues and any TSB's of the period. And then you will have to get into DATE CODES.
Is the customer concerned about a dedicated restoration or just a correct appearing assembly to be used on a driver?
Are you close enough to get photo(s)? After all of this time, it will be difficult to determine any and all modifications.
OFFICIAL KULTULZ EDIT ... yes, again ...
To be accurate, FORD CATALOGING does not give HOLLEY LIST NOS. I added that from cross-referencing ...