The Ford Barn - View Single Post

FlatheadEric · 03-09-2022, 03:05 PM

I want to save the sleeve to re-use as I don't have any later split sleeve/larger bearing combo on hand. The seal had completely failed as there was only the seal housing left when I first had a look down the throat of the tube.
I am going to have another go at it this weekend as I am now at the stage of a crushed seal housing up against the rear of the sleeve.
I will let you know if I have success.

03-09-2022, 03:05 PM	#19
FlatheadEric Member Join Date: Oct 2017 Location: Raglan, New Zealand Posts: 97	Re: Torque Tube Seal I want to save the sleeve to re-use as I don't have any later split sleeve/larger bearing combo on hand. The seal had completely failed as there was only the seal housing left when I first had a look down the throat of the tube. I am going to have another go at it this weekend as I am now at the stage of a crushed seal housing up against the rear of the sleeve. I will let you know if I have success.