Quote:
Originally Posted by FlatheadEric
I have a 37 with solid bearing sleeve and have been trying to remove the seal and sleeve. Made a toggle that slips through the sleeve and seal and hooks up behind the seal. A bolt through the toggle and plate across the face of the torque tube, heat around the outside of the torque tube and wind the bolt up as tight as I could go. Nothing budged apart from squashing the seal up against the back of the bearing sleeve.
Is slide hammer action the way to move these?
|
No. To remove the bearing sleeve you make a tool and twist it out.
There have been threads on it and I showed doing it on one of my videos.
This is a video I saw that helped me:
https://www.youtube.com/watch?v=LXLmcLBMa2A
This is mine:
https://youtu.be/pt0rwdTgkZU
Mart.