The Ford Barn - View Single Post

toby · 11-25-2010, 09:01 AM

This Knudsen head is actually for a "G" series 226. The back of the "G" head is shaped differently than an "H' series. "G" engine is flat at the back and the "H" has a bump-out. The head would fit the "M" 254 six which is the same block as the "H" series.

11-25-2010, 09:01 AM	#48
toby Senior Member Join Date: May 2010 Location: Racine, WI Posts: 472	Re: How about some engine pictures! This Knudsen head is actually for a "G" series 226. The back of the "G" head is shaped differently than an "H' series. "G" engine is flat at the back and the "H" has a bump-out. The head would fit the "M" 254 six which is the same block as the "H" series.