The Ford Barn - View Single Post - Holly 94 jet recommendation for a flathead running open exhaust?

F1 Flathead · 05-26-2010, 02:03 PM

Dick,
Thanks for the excellent insight. That's the first response that I've received that trys to explain why my stock jets may be too lean. I think you also raise a very good point in that an engine that is on the lean side will more likely missfire if something is not 100% in the ignition system. I think I will try throwing some slightly larger jets in to evaluate the effect. Where's the best place to get jets? Are they just standard Holley jets? Thanks again for the response.
Dan

05-26-2010, 02:03 PM	#29
F1 Flathead Member Join Date: May 2010 Location: Brighton Michigan Posts: 47	Re: Holly 94 jet recommendation for a flathead running open exhaust? Dick, Thanks for the excellent insight. That's the first response that I've received that trys to explain why my stock jets may be too lean. I think you also raise a very good point in that an engine that is on the lean side will more likely missfire if something is not 100% in the ignition system. I think I will try throwing some slightly larger jets in to evaluate the effect. Where's the best place to get jets? Are they just standard Holley jets? Thanks again for the response. Dan