The Ford Barn - View Single Post - STREET MACHInES, Engines, gearing and etc

Ol' Ron · 09-02-2019, 02:19 PM

One way to save money is to have your cast iron heads angled milled .050" with the majority of the material removed from the valve side of the head. Then check for piston to head clearance. A Dremel can fix any interfere. adds a point in compression

09-02-2019, 02:19 PM	#14
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,860	Re: STREET MACHInES, Engines, gearing and etc One way to save money is to have your cast iron heads angled milled .050" with the majority of the material removed from the valve side of the head. Then check for piston to head clearance. A Dremel can fix any interfere. adds a point in compression