The Ford Barn - View Single Post - Who sells the best 39-48 wheel cylinders

Mart · 08-31-2013, 03:23 AM

If you are buying rear cylinders, just make sure the feed hole is drilled at the correct angle. If the face is spot faced and dips under the surface of the casting, the angle is wrong. There was a thread on here about it.

Mart.

08-31-2013, 03:23 AM	#12
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,756	Re: Who sells the best 39-48 wheel cylinders If you are buying rear cylinders, just make sure the feed hole is drilled at the correct angle. If the face is spot faced and dips under the surface of the casting, the angle is wrong. There was a thread on here about it. Mart.