The Ford Barn - View Single Post - Cannot Get Rebuilt Ignition Cable to Read 6 Volts on the Points

shew01 · 05-10-2020, 04:52 PM

Sponsored Links (Register now to hide all advertisements)

I also tried a jumper from the junction box to the dimple in the distributor screw hole (for lack of a better phrase). That did not send 6 volts to the points that are being held open with a business card.
(The wing nuts on the junction box are both reading 6 volts.)

Sent from my iPhone using Tapatalk

05-10-2020, 04:52 PM	#6
shew01 Senior Member Join Date: Sep 2016 Location: Roanoke, VA USA Posts: 1,908	Cannot Get Rebuilt Ignition Cable to Read 6 Volts on the Points Sponsored Links (Register now to hide all advertisements) I also tried a jumper from the junction box to the dimple in the distributor screw hole (for lack of a better phrase). That did not send 6 volts to the points that are being held open with a business card. (The wing nuts on the junction box are both reading 6 volts.) Sent from my iPhone using Tapatalk