The Ford Barn - View Single Post

Y-Blockhead · 07-07-2021, 07:28 PM

Cape Codder, I made a "press" to slip over my shifter. I slid it as far down as possible until it hit the floor then tightened the larger bolt in the center. I had to do it a couple of times because it springs back. I'll see if I can get a picture.

07-07-2021, 07:28 PM	#16
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,849	Re: Tech help with model A cabin space. Cape Codder, I made a "press" to slip over my shifter. I slid it as far down as possible until it hit the floor then tightened the larger bolt in the center. I had to do it a couple of times because it springs back. I'll see if I can get a picture. Last edited by Y-Blockhead; 07-07-2021 at 11:48 PM.