Thread: Rebuilt Flathead Problems.
View Single Post
Old 12-12-2017, 08:44 PM   #82
George/Maine
Senior Member
 
George/Maine's Avatar
 
Join Date: May 2010
Location: Mid coast Maine
Posts: 1,878
Default Re: Rebuilt Flathead Problems.
If the position isn't the same when lined up.
My guess you may not the correct count on gears. cam is 44 and crank is 22
Also when both valves closed #1 is the dot at 12 o'clock or 6 o'clock?
George/Maine is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)