View Single Post
Old 08-12-2013, 11:18 PM   #4
296 V8
Join Date: May 2010
Location: nor~cal
Posts: 455
Default Re: water leaks around head studs on 1936 LB engine

Originally Posted by throwback View Post
Yes, all head studs threads were cleaned out and permatex aviation 300 sealer was used on the studs. The studs were new studs purchased from Roy Nacwitz. Any thoughts on next steps?
1. Remove leakers
2. Clean
3. Apply permatex right stuff
4. Replace stud that will now never leak … there’s a reason its 23 bucks a can
296 V8 is offline   Reply With Quote