View Single Post
Old 03-25-2020, 06:16 AM   #12
JOHNCL
Junior Member
 
Join Date: Feb 2020
Location: northern Maryland
Posts: 27
Default Re: Uni-Steer advice sought

I have started assembly of the new hubs on my 34. My hydraulic backing plates, year unknown, fit on the spindles perfectly. The bolt-on steering arms with 1 3/4" drop allow the tie rod to pass under the stock, but split, wishbones. Hence my first two worries about new parts were unfounded. I did have to run to an industrial bolt store to get 1/2" fine thread socket head cap screws for the steering arms. I'm awaiting Fed Ex deliveries on other stuff to continue the cross steering build process.
JOHNCL is offline   Reply With Quote