The Ford Barn - View Single Post

Digger · 03-13-2020, 03:52 PM

Will get more pics out this weekend. Needs a few tweaks, it is a driver. The bolt on driver side hood hinge is a modern bolt that is way too long and most likely cross threaded. Needs new bolts on the passenger rear fender to farthest back wood section, and only wood I will work on is replacing the inner door panels. They are currently some type of 1/8” pressboard and want to get them back to close to original looking. But she cruises on the highway just fine.

03-13-2020, 03:52 PM	#10
Digger Senior Member Join Date: May 2010 Location: Pacific Grove, CA Posts: 1,210	Re: Welcome Home! Will get more pics out this weekend. Needs a few tweaks, it is a driver. The bolt on driver side hood hinge is a modern bolt that is way too long and most likely cross threaded. Needs new bolts on the passenger rear fender to farthest back wood section, and only wood I will work on is replacing the inner door panels. They are currently some type of 1/8” pressboard and want to get them back to close to original looking. But she cruises on the highway just fine.