The Ford Barn - View Single Post

Keith True · 03-01-2020, 08:15 AM

Those rubber protrusions are supposed to be there.Half on one rubber,half on the other.They meet in the middle of the frame.Then the steel sleeves slide through both.Those sleeves are very important.You would not have used them with the floaters.You may just have wrong bolts too.

03-01-2020, 08:15 AM	#2
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 2,989	Re: Rear Motor Mount Rubber Issue Those rubber protrusions are supposed to be there.Half on one rubber,half on the other.They meet in the middle of the frame.Then the steel sleeves slide through both.Those sleeves are very important.You would not have used them with the floaters.You may just have wrong bolts too.