View Single Post
Old 02-27-2020, 09:18 AM   #6
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 9,296
Default Re: Redneck ( but effective) way to clean gas tank

Quote:
Originally Posted by whirnot View Post
Nice tractor Bill!!


I realize you only indicated this method would make it better and not perfect, but I would definitely offer a challenge to you. Open it up where all of the insides can be seen to verify the rotating method does get all of the rust inside.

If you are apprehensive about cutting it open, I will make an offer to you. Send me the tank and I will cut the tank open in the factory welds while videoing it with a GoPro. This will show what the inside of the tank looked like and then I will weld the tank back together and send it back at no charge. I will let you post the video showing how effective your process was.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote