View Single Post
Old 01-26-2020, 11:58 PM   #6
CWPASADENA
Senior Member
 
CWPASADENA's Avatar
 
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,429
Default Re: Generator cutout wiring hookup pictures.

Some later generators did not use a stud for the armature, there were either 1 or 2 wires that came thru the generator case and these wires would attach to the ARM or GEN side of the cut-out. As stated above, both wiring harness wires attach to the BAT side of the cut-out.


Chris W.
CWPASADENA is offline   Reply With Quote